主要功能特點：
分體式結構設計，操作方便，按新國標GBl9758-2005技術要求研制；
采用內置全流式取樣技術，專用測量摩托車急加速、怠速工況時的煙度；
高亮度數碼顯示，進口關鍵零部件組裝而成；
采用全流式耐高溫的特殊取樣探頭，采樣穩定、精確、方便；
開機預熱時間10分鐘，并自動調零；
數據自動線性化處理，可顯示不透光度N、光吸收系數K；
出現故障時自動顯示故障代碼；
附有自動時鐘顯示，內置打印機或藍牙、RS232接口)供選擇。
主要技術參數：
測量范圍 不透光度N: 0～100%
光吸收系數K:0～90.65m-1
示值誤差 ≤±2%
穩定性 自動校零，量矩漂移≤±1%/4h
分辨率 0.1%
響應時間 1S±0.1S
輸出方式 LED(4位)顯示，可附打印機，打印出5組急加速煙度、怠速煙度、光吸收系數的最大值及平
均值，測試時間、日期等，可附接口與計算機聯網
環境條件 溫度0～40℃，相對濕度≤90%
電 源 AC100-240V 50/60Hz 消耗功率150VA
外形尺寸 控制單元：250mm(長)×310mm(寬)×170mm(高)
測量單元：350mm(長)×260mm(寬)×170mm(高)
重 量 控制單元：4kg，
測量單元：5kg
Main Features:
◆Separated structural design, easy to operate, according to the new national standard GBl9758-2005 technical requirements for development.
◆With built-in full-flow sampling techniques, application-specific measurement of motorcycle hard phases of acceleration, idle condition when the smoke.
◆High-brightness digital display, import key components assembled.
◆Using a special full-flow high-temperature sampling probe, sampling a stable, accurate and convenient.
◆Ji machine warm-up time 10 minutes, and automatic zero adjustment.
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K.
◆Fails automatically displays fault code.
◆With automatic clock display, built-in printer (RS-232 or analog interface network) for selection.
Main technical parameters:
Test Scope：No light transmission N:0～100%
Light absorption coefficient K:0 ~ 90.65m-1
Indication error: ≤±2% ( measured value)
Stability:moment drift≤±1%/4H
Repeatability ≤±1%
The response time:1S +/-0.1S
Output LED ( 4 ) may be attached to the printer, display, print out 5 groups of sudden acceleration smoke, smoke, speed of light
absorption coefficient of maximum value and average value, test time, date, can interface with computer networking
The measurement chamber temperature:
70 ℃ (automatic), when the temperature error of ≥± 10%, temperature and error indicator light
And-use temperature: -5~50°C, Relative humidity: ≤90%
Power: AC100~240V 50/60Hz or DC12V, Power consumption: 150VA
Dimensions: control unit: 250(L)×310(W)×170 (H)mm
( including bracket) measuring unit: 350(L)×260(W)×170(H)mm
Control unit: 4kg
Measuring unit: 5kg
